Meeting
Dec 30, 2019
Click on any image to start the slide show.
Headstock pattern
Headstock Rough Shaped
After the meeting, Larry roughed out the headstock shape.
Larry Sakayama's shop in Wirtz, VA
Main Events: Neck mortise, radius fingerboard, position markers
Mortise
We cut the neck mortise and drilled the bolt holes and truss rod hole
Position Markers
We decided on mahogany position markers.
The markers were cut out with a 1/4" plug cutter. Holes were drilled wit a 1/4" Forstner bit. The pugs were glued in with CA glue.
Sanding the body - prep for finishing
Fretboard Glued and Peghead Rough Shaped
After the meeting Larry glued on the fretboard.
